Also known as a Local Area Network
A LAN supplies networking capability to a group of computers in close
proximity to each other such as in an office building, a school, or a home. A
LAN is useful for sharing resources like files, printers, games or other
applications. A LAN in turn often connects to other LANs, and to the Internet or
other WAN.
Most LANs are built with relatively inexpensive hardware such as Ethernet
cables, network adapters, and hubs. Wireless LAN and other more advanced LAN
hardware options also exist.
Specialized operating system software may be used to configure a LAN. For example, most flavors of Microsoft Windows provide a software package called Internet Connection Sharing (ICS) that supports controlled access to LAN resources.
The term LAN party refers to a multiplayer gaming event where participants bring their own computers and build a temporary LAN.
Also Known As: local area network
Examples: The most common type of LAN is an Ethernet LAN. The smallest home LAN can have exactly two computers; a large LAN can accommodate many thousands of computers. Many LANs are divided into logical groups called subnets. An Internet Protocol (IP) "Class A" LAN can in theory accommodate more than 16 million devices organized into subnets.
Area Networks
For historical reasons, the industry refers to nearly every type of network as
an "area network." The most commonly-discussed categories of computer networks
include the following -
Local Area Network (LAN)
Wide Area Network (WAN)
Metropolitan Area Network (MAN)
Storage Area Network (SAN)
Personal Area Network (PAN)
Desk Area Network (DAN)
Controller Area Network (CAN)
Cluster Area Network (CAN)
LANs and WANs were the original flavors of network design. The concept of "area"
made good sense at this time, because a key distinction between a LAN and a WAN
involves the physical distance that the network spans. A third category, the
MAN, also fit into this scheme as it too is centered on a distance-based
concept.
As technology improved, new types of networks appeared on the scene. These, too, became known as various types of "area networks" for consistency's sake, although distance no longer proved a useful differentiator.
LAN Basics
A LAN connects network devices over a relatively short distance. A networked
office building, school, or home usually contains a single LAN, though sometimes
one building will contain a few small LANs, and occasionally a LAN will span a
group of nearby buildings. In IP networking, one can conceive of a LAN as a
single IP subnet (though this is not necessarily true in practice).
Besides operating in a limited space, LANs include several other distinctive features. LANs are typically owned, controlled, and managed by a single person or organization. They also use certain specific connectivity technologies, primarily Ethernet and Token Ring.
WAN Basics
As the term implies, a wide-area network spans a large physical distance. A WAN
like the Internet spans most of the world!
A WAN is a geographically-dispered collection of LANs. A network device called a router connects LANs to a WAN. In IP networking, the router maintains both a LAN address and a WAN address.
WANs differ from LANs in several important ways. Like the Internet, most WANs are not owned by any one organization but rather exist under collective or distributed ownership and management. WANs use technology like ATM, Frame Relay and X.25 for connectivity.
LANs and WANs at Home
Home networkers with cable modem or DSL service already have encountered LANs
and WANs in practice, though they may not have noticed. A cable/DSL router like
those in the Linksys family join the home LAN to the WAN link maintained by
one's ISP. The ISP provides a WAN IP address used by the router, and all of the
computers on the home network use private LAN addresses. On a home network, like
many LANs, all computers can communicate directly with each other, but they must
go through a central gateway location to reach devices outside of their local
area.
What About MAN, SAN, PAN, DAN, and CAN?
Future articles will describe the many other types of area networks in more
detail. After LANs and WANs, one will most commonly encounter the following
three network designs:
A Metropolitan Area Network connects an area larger than a LAN but smaller than a WAN, such as a city, with dedicated or high-performance hardware.
A Storage Area Network connects servers to data storage devices through a technology like Fibre Channel.
A System Area Network connects high-performance computers with high-speed connections in a cluster configuration.
Conclusion
To the uninitiated, LANs, WANs, and the other area network acronyms appear to be
just more alphabet soup in a technology industry already drowning in
terminology. The names of these networks are not nearly as important as the
technologies used to construct them, however. A person can use the
categorizations as a learning tool to better understand concepts like subnets,
gateways, and routers.